Sheet metal foot U system or U frame laboratory bench carrier is an aesthetic model that draws attention with its production difference, unlike other systems. Unlike the welding process of box profiles such as A frame - A foot and C frame C foot, it is a foot model created by cutting galvanized sheet metal sheet from 2 mm thickness with millimetric error margins in automated laser cutting devices, bending the cut sheet in high tonnage press brake bending devices and interlocking the formed sheet profiles.

Sheet metal foot U system U frame feet are first covered with electrostatic epoxy paint with an average thickness of 60-90 µm (micron) after rough cleaning and surface acid cleaning in order not to be affected by the acidic environment in which they are located for many years while they are disassembled. Then, hot baking process is carried out at 200 ° C.

All system vertical carriers are supported by pingo feet that can be turned by hand, which allow precise ground height adjustment under them.

MDF, galvanized steel, stainless steel or polypropylene pp bottom cabinets can be easily mounted to this system without any drilling.

The vertical parts that look aesthetic can be painted in different colors, either in the colors of your institution or just in a way that will not tire your eyes.