If you are working with intense acid in your laboratories, the performance fume hoods you need are produced for the solution. Performance fume hoods, which are produced according to both the relevant standards in Turkey and the European standard EN14175 standards, are also produced by examining the American standard Ashrae 110 standard.

Performance fume hoods can be integrated into central systems and have superior air discharge power on their own with their own independent ventilation channels. Thanks to the microprocessor in the fume hood control panel, the airflow and vav control system has an air discharge system in accordance with the TS EN 14175 quality standard. With the optional fume hood temperature reading, you can stop production if it is not at the appropriate temperature for your experiments.

Thanks to the Acid Resistance Performance Fume Hood control panel, you can read the air flow rate, and even if you do not notice it, the control is in your fume hood thanks to the audible and visual alarms. The air flow rate is controlled between 0.35 m/s and 0.50 m/s specified in the standards.

Since performance fume hoods throw the air they take from the environment due to their structure, make sure that the clean air supplies of your laboratories are always active. Thanks to the hood that prevents heavy and light gases in the interior of the performance fume hoods from circulating inside the device, it ensures the transfer of gases taken from outside and formed inside the device during testing / production to the outside. ATEX certified Exproof fan is among the options for preventing flammable and combustible situations.

It is preferred that the countertop materials used inside the performance fume hoods have a pediment structure against situations such as spillage and overflow. In addition, industrial ceramics (stoneware Monolite Italy, Keraplan Italy, Systemceram Germany) against intense acids or stainless steel can be preferred for liquid use only.

In laboratories where paint solvents will be used, the interior facades of the fume hood can be covered with anti-acid compact laminate or polypropylene sheets of different thicknesses. Polypropylene coating of 3 mm, 5 mm, 10 mm, 15 mm thickness is recommended so that the interior coatings of the fume hood do not sag or deform even after many years.

The interior usage areas of the performance fume hood are again covered with polypropylene pp depending on the need. In addition to the inner sides, top and back, the rear hood should also be made of PP polypropylene.

Those who care about laboratory safety can choose a performance fume hood base cabinet that is fire-resistant chemical storage cabinet in accordance with EN14470, as well as a polypropylene base cabinet, MDF base cabinet or galvanized steel base cabinet.

 https://www.tezgen.com/files/cap/images/image.png